Shopping Cart:0 items



Navigation:





Information:




Search


Use keywords to find the product you are looking for.

Advanced Search





93'-95' RX-7 AEM Series II PnP EMS [TPE-RX7-AEM]    
93'-95' RX-7 AEM Series II PnP EMS

  This Kit is specifically designed for 93'-95' RX-7's by Tri-Point Engineering. This kit includes a brand new 30-6050 AEM Series II EMS, a Patch harness that will make the 6050 Plug and play into a stock RX-7 engine harness and a start-up base map. All emissions controls, dash functions and sequential turbo control will remain. Because this kit uses a complete 30-6050 all of the Series II ECU features are still available. If Sequential turbo Control and Emissions controls are not needed the system can be wired to utalize up to 12 inj drivers, 8 coil outputs, 16 General purpose outputs, 4 EGT inputs and CAN communication. This is the best PnP ECU on the market for your FD RX-7.   

  AEM’s Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below. Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows™ compatible software (XP, Vista, Windows7) makes the task of copying, viewing and manipulating data as simple as a click of the mouse. Our new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition.

Legal in California only for racing vehicles which may never be used upon a highway.

SERIES 2 KEY FEATURES

 
Plugs directly into the factory harness. No rewiring necessary.
Uses all the factory sensors.
Includes start up calibrations.
System is fully enabled and unlocked - Never pay for upgrades!
Context sensitive help eases tuning process.
Maps can be password protected by the tuner to prevent unauthorized usage or sharing.
Runs on Windows-compatible software.
Up to 12 peak and hold injector drivers.
Up to 8 direct-fire coil outputs.
Up to 16 general-purpose outputs.
Up to 8 definable switch inputs.
Up to 4 EGT inputs with fuel trim.
1MB of internal data logging.
Electronic boost control.
Full idle control.
Programmable traction control.
Software definable knock control.
Two step launch control.
User configurable soft-cut rev limiters.
Wet or dry nitrous control.
Tune using new USB communication port or serial port.
Works with all AEM gauges.

Please Select your options:

Coil Options: Stock coils will come with the jumper wired in for stock coils.

Add Coil Option will come with the jumper wired for PnP coil options at a later date.  You will not need to send in or modify your PnP harness. This will make switching to Smart coils pnp.

Add AEM smart coil harness will come with an wiring harness designed to install 4 AEM Smart coils(30-2853) into your RX-7. This harness is designed for PnP opperation. Only a few connections and some ring terminals for Battery power, Battery ground and Engine ground. This kit still requires the AEM smart coils(30-2583), coil mounting bracket and spark plug wires. These parts can be supplied upon request.

Add AEM Smart coils with harness includes the above harness with 4 AEM Smart Coils(30-2853). This kit still requires a coil mount and spark plug wires. These parts can be supplied upon request.

Add LS2 coil harness will come with an wiring harness designed to install 4 LS2 Coils into your RX-7. This harness is designed for PnP opperation. Only a few connections and some ring terminals for Battery power, Battery ground and Engine ground. This kit still requires LS2 coils, coil mounting bracket and spark plug wires. These parts can be supplied upon request.

 

Wideband: Standard jumper harness kit comes universaly wired for wideband integration(12vSW, GND and 0-5v Input). Adding an optional Wideband UEGO controller will include the Wideband Kit and will come prewired for PnP opperation.

30-2310 Is a UEGO controller only, no display.

30-4100 is a Digital UEGO with a display.

30-5130 is an Analog UEGO with display.

30-4900 Is a Wideband Failsafe UEGO Boost gauge combo with Display. The Wideband Failsafe will come prewired with CAN communications between the gauge and ECU. 

 

CAN 3rd Party Output: This option will add a connector prewired for 3rd Part Data Outputs. This Can connect to a MoTeC Dash Diaplay, AIM Sports MXL Dash, Racepack IQ3, AEM AQ-1 Logger and many more.

 

Options Connector: This options connector will come prewired with a 36'' pigtail for, 12vSW, Chassis GND, Sensor GND, 5vRef, EGT inputs, SW inputs, 0-5v Inputs, spare inj drivers, spare coil drivers and, Low Side GND outputs. This will make adding additional pressure sensors, Switch inputs, EGTs, Switch to GND outputs and, AUX sensor inputs a breeze.

 

Trim Switch: This option will come with an AEM 12 position SW prewired on a 36'' lead into the Tri-Point Jumper Harness. Selecting two trim switches will come with 2 AEM 12 position SW prewired opn seperate 36'' leads. These Trim Switchs can be configured to alter Fuel Mixture, Timing, Boost control and Traction control settings.  


If you have any questions reguarding our options please Email or give us a call. (818) 348-5385.



$1,949.99

Available Options:
Coil Options:
Options Harness:
CAN:
Wideband:
Trim switch:
Quantity:

Reviews Add to Wish List


Customers who bought this product also purchased





301 Moved Permanently

Moved Permanently

The document has moved here.


Apache/2.2.25 (Unix) mod_ssl/2.2.25 OpenSSL/1.0.0-fips mod_bwlimited/1.4 Server at www.loadedcommerce.com Port 80